General safety instructions
24
XTender BAG0158.2 03.18
•
Always fix the front or rear weights to the intended fixing points
according to regulations.
•
Comply with the maximum load of the connected implement and
the permissible axle and drawbar loads of the tractor.
•
The tractor must guarantee the prescribed brake delay for the
loaded vehicle combination (tractor plus connected implement).
•
Check the brake power before moving off.
•
When turning corners with the implement coupled, take the wide
sweep and centrifugal mass of the implement into account.
•
Before road transport, ensure sufficient side locking of the tractor
lower links, when the implement is fixed to the three-point
hydraulic system or lower links of the tractor.
•
Before road transport, move all the swivel implement parts to the
transport position.
•
Before road transport, secure all the swivel implement parts in
the transport position against risky position changes. Use the
transport locks intended for this.
•
Before road transport, secure the operating lever of the three-
point hydraulic system against unintentional raising or lowering
of the coupled implement.
•
Before road transport, check that the required transport
equipment, e.g., lighting, warning equipment and protective
equipment, is correctly mounted on the implement.
•
Before road transport, carry out a visual check that the top and
lower link pins are firmly fixed with the linch pin against
unintentional release.
•
Adjust your forward speed to the prevailing conditions.
•
Before driving downhill, switch to a low gear.
•
Before road transport, always switch off the independent wheel
braking (lock the pedals).
•
Observe the maximum permissible total weight.
Содержание XTender 2200
Страница 105: ...Cleaning maintenance and repair XTender BAG0158 2 03 18 105 12 7 Hydraulic diagram ...
Страница 107: ...Cleaning maintenance and repair XTender BAG0158 2 03 18 107 ...
Страница 108: ......