Amazone XTender 2200, Руководство по эксплуатации

Страница: 69 / 108

Coupling and uncoupling the implement
XTender BAG0158.2 03.18
69
7.1 Coupling the implement
WARNING
Risk of crushing and contusions between the tractor and the
implement when coupling the implement!
Instruct people to leave the danger area between the tractor and the
implement before you approach the implement.
Any helpers may only act as guides standing next to the tractor and
the implement, and may only move between the vehicles when both
are at a standstill.
WARNING
Risk of crushing, drawing in, catching or contusions if the
implement unexpectedly comes away from the tractor!
•
Use the intended equipment to connect the tractor and the
implement in the proper way.
•
When coupling the implement to the tractor's three-point
hydraulic system, it is vital to ensure that the tractor mount
categories of the tractor and the implement are the same.
•
Only use the upper and lower link pins provided (original pins)
for coupling the implement.
•
Check the upper and lower link pins for visible defects whenever
the implement is coupled. Replace the upper and lower link pins
if there are clear signs of wear.
•
Use locking pins to secure the upper and lower link pins against
accidental loosening.
•
Visually check that the upper and lower link hooks are correctly
locked before you drive off.
WARNING
Danger of breaking during operation, insufficient stability and
insufficient tractor steering and braking power in the event of
improper use of the tractor!
You may only connect the implement to tractors suitable for the
purpose. See section "Checking tractor suitability", page 62.
WARNING
Risk of power supply failure between the tractor and the
implement through damaged supply lines!
During coupling, check the course of the power lines. The supply
lines
•
must give slightly without tension, bending or rubbing on all
movements of the connected implement.
•
must not chafe against other parts.