Amazone Cenius 4003-2TX, Руководство по эксплуатации

Страница: 95 / 126

Transportation
Cenius03-2TX BAG0112.13 07.21 95
9.1 Changing from working to transport position
1. Actuate the tractor control unit yellow .
→ Lift the implement via running gear and drawbar.
2. Switch off traction assistance (option).
3. Move both side discs / outside tines to the transport position.
4. Adjust the working depth so that the transport width of 3 m is not
exceeded.
Implements with tandem roller:
Set the maximum working depth.
→
This ensures that the maximum transport width of 3 m is not
exceeded.
5. Actuate the tractor control unit
blue
.
→
Fold in the implement.
6. Actuate the blue tractor control unit against unintentional actua-
tion.
7. Cenius 7003-2TX: Actuate the tractor control unit
yellow
.
→ Lower the implement height to less than 4 m. For this, maintain
a ground clearance of approx. 25 cm.
8. Close the stop tap on the drawbar cylinder for road transport.
Rear harrow (optional)
WARNING
Before folding the implement
•
Install the transport safety bar
(Fig. 61/3).
Risk of injury due to non-
compliance with the approved
transport width.
• Lock the tines in position 2 with
the positioning pins (Fig. 61/1).
Fig. 57