General safety instructions
Cenius03-2TX BAG0112.13 07.21
25
2.16.2 Hydraulic system
•
The hydraulic system is under a high pressure.
•
Ensure that the hydraulic hose lines are connected correctly.
•
When connecting the hydraulic hose lines, ensure that the hy-
draulic system is depressurised on both the machine and tractor
sides.
•
It is forbidden to block the operator controls on the tractor which
are used for hydraulic and electrical movements of components,
e.g. folding, swivelling and pushing movements. The movement
must stop automatically when you release the appropriate con-
trol. This does not apply to equipment movements that:
ο
are continuous or
ο
are automatically locked or
ο
necessarily require an open centre or pressure position to
operate correctly
•
Before working on the hydraulic system
ο
Lower the machine
ο
Depressurise the hydraulic system
ο
Switch off the tractor engine
ο
Apply the parking brake
ο
Take out the ignition key
•
Have the hydraulic hose line checked at least once a year by a
specialist for proper functioning.
•
Replace the hydraulic hose line if it is damaged or worn. Only
use AMAZONE original hydraulic hose lines.
•
The hydraulic hose lines should not be used for longer than six
years, including any storage time of maximum two years. Even
with proper storage and approved use, hoses and hose connec-
tions are subject to natural ageing, thus limiting the length of
use. However, it may be possible to specify the length of use
from experience values, in particular when taking the risk poten-
tial into account. In the case of hoses and hose connections
made from thermoplastics, other guide values may be decisive.
•
Never attempt to plug leaks in hydraulic lines using your hand or
fingers.
Escaping high pressure fluid (hydraulic fluid) may pass through
the skin and ingress into the body, causing serious injuries!
If you are injured by hydraulic fluid, contact a doctor immediately.
Danger of infection.
•
When searching for leak points, use suitable aids, to avoid the
serious risk of infection.
Содержание Cenius 4003-2TX
Страница 50: ...Structure and function 50 Cenius03 2TX BAG0112 13 07 21 Cenius 5003 2TX Fig 19 Cenius 6003 2TX Fig 20...
Страница 51: ...Structure and function Cenius03 2TX BAG0112 13 07 21 51 Cenius 7003 2TX Fig 21 Cenius 8003 2TX Fig 22...
Страница 102: ...Cleaning maintenance and repairs 102 Cenius03 2TX BAG0112 13 07 21 Fig 60...
Страница 126: ......
