Amazone Cenius 4003-2TX, Руководство по эксплуатации

Страница: 83 / 126

Adjustments
Cenius03-2TX BAG0112.13 07.21 83
Manual adjustment
Manual adjustment of the working depth of the coulters is performed
when the implement is raised.
The adjustment is carried out via:
• the roller
•
the support wheels
With the roller removed: Use the running gear for adjusting the work-
ing depth (see page 89).
→ Use as many spacer elements as required so that the implement
is horizontal during operation.
The working depth of the discs is set by adjusting
the spindle length.
Use the hand lever with the ratchet to make the
adjustment.
• Shorten spindle → Increases the working
depth.
•
Lengthen spindle
→
Reduces the working
depth.
Adjust all of the spindles to the same length.
Adjusting the spindle using the ratchet
1. Remove the linch pin (3).
2. Engage the turning lever (2) in the required
direction.
3. Use the hand lever (1) to lengthen or short-
en the spindle.
4. Secure the adjustment using the linch pin
(3).
5. Rest the hand lever in parking position on
the frame and secure with a linch pin.
The scale (4) serves for orientation during ad-
justment.
Fig. 46