Amazone Catros 3002-T Скачать руководство пользователя страница 38

Страница: 38 / 76

Structure and Function

Catros02-T BAG0078.3 03.14

5.2.1

Connecting the hydraulic hose lines

WARNING

Risk of being crushed, cut, caught, drawn in or struck due to
faulty hydraulic functions when the hydraulic hose lines are in-
correctly connected!

When connecting the hydraulic hose lines, observe the colored mark-
ings on the hydraulic plugs.



Check the compatibility of the hydraulic fluids before connecting
the implement to the hydraulic system of the tractor.

Do not mix any mineral oils with biological oils.



Observe the maximum approved hydraulic fluid pressure of
2,900 psi [200 bar].



Only connect clean hydraulic connectors.



Push the hydraulic plug into the hydraulic socket until the hy-
draulic plug is locked in.



Check the connecting points of the hydraulic hose lines for a
good, tight fit.

1. Adjust the operating lever on the control valve of the tractor to

the float position (neutral position).

2. Clean the hydraulic connectors of the hydraulic hose lines be-

fore you connect the hydraulic hose lines to the tractor.

3. Connect the hydraulic hose line(s) to the tractor control unit(s).

Содержание Catros 3002-T













































































Результаты поиска

Содержание Catros 3002-T

Отзывы:

Похожие инструкции для Catros 3002-T

Бренды по названию

Популярные бренды

Amazone Catros 3002-T, Руководство оператора

Результаты поиска

Содержание Catros 3002-T

Отзывы:

Похожие инструкции для Catros 3002-T

Бренды по названию

Популярные бренды