manualshive.com logo in svg

Amazone Catros 3002-T, Руководство оператора

Поделиться
Скачать
Amazone Catros 3002-T Скачать руководство пользователя страница 11

 

 

 

 

General Safety Instructions

 

Catros02-T  BAG0078.3  03.14

 

11

 

2.3 Personal 

safety 

 

The owner or field operations manager must provide the necessary 
personal protective equipment, such as: 

 protective 

eyewear 

 safety 

shoes 

 protective 

clothing 

 

skin protection, etc. 

 

The operator’s manual must always be: 

 

stored with the implement 

 

easily accessible for the operator and maintenance personnel 

Check all the available safety equipment regularly. 

2.4 

Safety and protective equipment 

 

Before each operation of the implement, all the safety and protective 
equipment must be properly attached and fully functional. Check all 
safety and protective equipment regularly. 

Faulty safety equipment 

 

Faulty or disassembled safety and/or protective equipment can lead 
to dangerous situations. 

2.5 

Additional safety measures 

 

As well as all of the safety information in this operator’s manual, 
comply with the general, national regulations pertaining to accident 
prevention and environmental protection. 

Comply with the statutory road traffic regulations when driving on 
public roadways. 

Содержание Catros 3002-T













































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды