manualshive.com logo in svg

Amazone Catros 3002-T, Руководство оператора

Поделиться
Скачать
Amazone Catros 3002-T Скачать руководство пользователя страница 14

 

 

 

 

General Safety Instructions

 

14 

 

Catros02-T  BAG0078.3  03.14

 

2.10.1 

Spare and wear parts 

 

Immediately replace any implement parts which are not in a perfect 
state. 

Use only original 

AMAZONE

 spare and wear parts or the parts 

cleared by AMAZONEN-WERKE so that the operating permit retains 
its validity in accordance with national and international regulations. If 
you use wear and spare parts from third parties, there is no guarantee 
that they have been designed and manufactured in such a way as to 
meet the requirements placed on them. 

AMAZONEN-WERKE accepts no liability for the damage arising from 
the use of unapproved spare parts, wear parts or auxiliary materials. 

2.11 

Cleaning and disposal 

 

Handle and dispose of any materials used carefully, especially when:

 

carrying out work on lubrication systems and equipment and 

 cleaning 

with 

solvents. 

2.12 Operator’s 

workstation 

 

Operation of this implement must be done by one person. This person 
must be seated in the driver’s seat in the cab of the tractor. 

Содержание Catros 3002-T













































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды