Amazon BUBBLER 361755REF, Руководство по началу работы

Страница: 6 / 20

4
GET TO KNOW YOUR AMAZON
TOP PANNEL BUTTONS
Purge Button
Press and hold the button until the LED goes off. This will initiate a purge.
The purpose of the purge is to clear out any debris or silt from the end of the
orifice line that could cause false pressure readings.
Tank Button
The tank button causes the tank to release its air pressure out the orifice line.
Wi-Fi Button
The Wi-Fi button can be gently pressed to activate the Wi-Fi signal. The USB Wi-Fi adaptor must be plugged into
one of the USB Host ports for the Wi-Fi button to work properly.
NOTE: (All buttons on the top panel are ca-
pacitive buttons and therefore may not work if
using gloves)
Display and Control Buttons
The display is not a touch screen it’s a very
low power “paper white” display. There are 4
navigation/control buttons that are capacitive
touch. Their operations are described above
them on the display and may change as you
navigate from one screen to another.
Cal Button
The Cal button allows the user to verify
calibration. It puts the Amazon in a state where
the tank will not pump and the tank and line
pressures will equalize. In this configuration the
user can apply a calibrated pressure reference
and verify that the pressure being read by the
Amazon matches the calibrated reference.