19
EN
NOTICE
For best results, disconnect one
side of the part under test. This is to avoid the
other components in the circuit to inhibit the
measurement.
• Insert the black connector lead (L) into the
COM
input jack (E).
• Insert the red connector lead into the
V/Ω/mA
input jack (G).
• Set the function switch (C) to the appropriate
resistance measurement mode:
Resistance
Function switch (C) position
≤
200
Ω
200 Ω
≤
2000
Ω
2000 Ω
≤
20 k
Ω
20 kΩ
≤
200 k
Ω
200 kΩ
≤
2000 k
Ω
2000 kΩ
• Place the test probes (L) across the circuit or
part under test.
• The stabilized value on the display (A) is read as
the actual reading.
Diode test
• Set the function switch (C) to the
position.
