Amate Audio DSP608, Руководство пользователя

Страница: 9 / 26

DSP608
– DSP608D
Jan 2017
9
Amate Audio
5 OPERATING THE DEVICE
5.1 Input Menus
To access the Input Menus press the <Channel or Channel> key. Press Exit to finish
editing or again <Channel or Channel> to edit other channels.
The following menus are available for each input channel. Please note that by
default the inputs and outputs channels are linked in groups of two. The following
options are shown for the input group composed of In1 and In2
5.1.1 Input Gain
Adjust the gain of each input, using the rotary knob.
5.1.2 Input Selection
Inputs 1&2 are always assigned to the analog inputs 1 and 2, while inputs 3&4 can
be assigned to the analog or digital source (AES/EBU or Dante).Turning the rotary
knob, the source can be selected.
In
DSP 608D, the Dante input can be assigned too.
5.1.3 Delay
Adjust the delay by turning the rotary knob. Push this knob to switch the unit
between ms, ft or m.
5.1.4 Crossover
•
Low Pass
– First adjust the Low Pass Filter cut-off frequency. To switch it off, turn
the rotary knob clockwise until frequency reaches 20 kHz.
Second, press the rotary knob and select from the available types and slopes:
Type: Butterworth, Slopes: 6dB, 12dB, 18dB or 24dB
Type: Bessel. Slopes: 6dB, 12dB, 18dB or 24dB
Type: Linkwitz-Riley. Slope: 12dB or 24dB
-1.25dB
In 12 Gain
Analog
In 34 Source
0.090ms
In 12 Delay
Signal
AES Stereo
In 34 Source
Dante
In 34 Source