Amate Audio DSP608, Руководство пользователя

Страница: 17 / 26

DSP608
– DSP608D
Jan 2017
17
Amate Audio
5.3.4 Version Info
Shows the device software and hardware information. Turn the rotary knob to display
the information available:
5.3.5 Routing
The routing function assigns the inputs to the outputs using pre-established
templates. The templates are shown in the table below:
Routing Out 1 Out 2 Out 3 Out 4 Out 5 Out 6 Out 7 Out 8
Stereo 1-
Way
In1 In2 Off Off Off Off Off Off
Stereo 2-
Way
In1 In2 In1 In2 Off Off Off Off
Stereo 3-
Way
In1 In2 In1 In2 In1 In2 Off Off
Stereo 4-
Way
In1 In2 In1 In2 In1 In2 In1 In1
Mono 8-
Way
In1 In1 In1 In1 In1 In1 In1 In1
The unit assigns the Input source for the corresponding outputs when each routing
mode is selected. The Stereo configuration will also activate the links between paired
channels (Out 1&2, Out 3&4, Out 5&6, Out 7&8)
NOTE
: The configuration mode configures the input sources when selected. The
user can change the source afterwards if desired. It does not keep the configuration
in memory.
5.4 Copy/Paste Keys
The Copy and Paste keys can be used to copy the parameters of one configuration
item (i.e. a parametric EQ, a compressor, a delay, etc.) from one channel to another.
SN: 0000010262
Version Info
SW:10.0.3.105796
Version Info
HW: 4.9.3
Version Info
169.254.50.254
IP Address
B896:74:01:01:C1
MAC Address
Stereo 3-Way
Routing: