Amate Audio DSP608, Руководство пользователя

Страница: 7 / 26

DSP608
– DSP608D
Jan 2017
7
Amate Audio
The GUI application makes it much easier to control and monitor the device, allowing
the user to get the whole picture on one screen. Programs can be recalled and
stored fr
om/to Computer’s hard drive, thus expanding the storage to become virtually
limitless. See Section 6 of this manual for instructions to operate the software.
DSPLink is available for PC and Mac. A USB pen drive or CD-ROM with the
software is included in the original package of the unit. Check Amate
Audio’s website
for a latest version download ( www.amateaudio.com ).
Installation for PC-Windows:
Double click the installation file, depending whether you have a 32 or a 64-bit
system:
Amate_Audio_DSPLink_32_bit_v_10_X_X_BuildNr.msi
Amate_Audio_DSPLink_64_bit_v_10_X_X_BuildNr.msi
Follow the on-screen instructions. You may be prompted to install the Microsoft
Visual Runtime libraries before finishing the installation. Click the checkbox to
proceed with this action.
Installation for Mac:
First unzip the provided installation file:
Amate_Audio_DSPLink_v_10_X_X_BuildNr.mpkg.zip
Then select the .mkpg file with Click and select “Open”. Then follow the
on-screen instructions.
4.4 Connecting the device to a computer
4.4.1 USB
WARNING: Always install the software package DSPLink before connecting your
unit to the computer. See previous section for details.
After installing DSPLink, please use the provided USB cable to connect the unit to
your computer. The first time you connect a device, the system will ask you to look
for the driver. Choose the option “do not look for updates and to automatically select
the best driver”.
Run DSPLink and the unit will be automatically detected.
Click on the arrow next to the detected unit to open the window for parameter
edition.
4.4.2 Ethernet
Use a standard CAT5 or CAT6 cable with RJ45 connectors (not supplied) to connect
the unit to your Local Area Network. The most convenient way is to connect it to a
router that provides automatic IP addresses (DHCP enabled), and that is sharing the
same network with the computer in which you are running DSPLink. In this case the
unit will be detected and configured automatically.
For direct connection with a computer, or through a switch not supporting DHCP,
then you can either let your computer get an automatic IP of the ZeroConfig range,
or assign a fixed IP to it: