Amano Time Guardian Series, Инструкция по установке и эксплуатации

Страница: 75 / 414

Time Guardian Series
– Setup Wizard 3-51
•
End Time : The time of the day of the End Date that the DLS period will end.
Press the Reset button to Reset the DLS at the Terminal.
8. Click on the Connection tab.
9. In the Connection field, select the type of connection you are using to communicate with the
terminal(s). The required information in the Connection Info will depend on your connection.
•
Ethernet : The terminals communicate to the Host PC via Ethernet connection. If
selected, you must enter the IP Address and Port. [Obtain the correct IP address from
your network administrator, or alternatively, please consult the appropriate terminal
manual (i.e., MTX-15 Installation Guide, FPT-40 Fingerprint Installation Guide, Nexus
Lite documents, Hand Punch 50e Manual, etc.) to perform terminal diagnostics,
hardware configuration, and identify the IP address].
•
Modem : A modem is used at the Com Port of the Host PC to communicate to the
terminal(s). If selected, you must select the Com Port, Baud Rate, Modem Type, and
enter the Phone Number. If your modem is not available from the list, select a
compatible model. This information should be provided in the modem’s documentation.
The telephone number entered must be the terminal’s modem. (Include 1 + (Area Code)
+ 7-digit phone number, when applicable)
•
Direct : The terminal(s) are directly connected to the Host PC via Com Port. If selected,
you must select the Com Port and Baud Rate.
10. Click on the Terminals tab to add, edit, delete, or find terminals.
11. To find terminals, click on the Find Terminals button to search for terminals (see figure).