PIX-25
31
PIX-25 Support
Should you need further assistance in clearing an error message:
1.
Visit our website at:
www.amano.com/time
or
find more information at
www.amano.com/tkb
2.
Call us at:
1 (800) 253-9836
Monday – Friday 8:15am – 5:00pm (EST)
3.
E-mail us at:
PIX-25 Cleaning
Do not use any chemical solvents or oils to clean or lubricate your PIX-25.
This will damage your clock. To clean the inside of your clock, simply blow it
out with air.
Resetting Clock After Extended Loss of Power
If there has been an AC power interruption sufficient to drain the internal
lithium battery, the date setting, and the clock setting will need to be reset.
PIX-25 Power Modes
Power On Mode
During this mode where the clock has power from the AC power adapter, the
clock will have all functionality and the display will show the current time,
date, weekday, ink level, atomic clock signal level, etc.
Power Off Mode
During this mode where the clock has NO power from the AC power adapter,
the clock will have NO functionality and the display will be off. The clock will
continue to run on the internal coin battery to retain the correct time and
user settings. Upon restoring the AC power, the clock will return to normal
operation.
Note
– If the clock does not have AC power and the coin battery is
dead, the clock will lose all user settings and the time and date will
revert to displaying the factory default setting of
Jan 1, 2011, 12:00 AM
when the AC power is restored. The
maximum amount of time the clock can preserve the user settings
with the battery is 2 years (see Specifications).
: 866-487-4751
VISIT: WWW.TIMECLOCKEXPERTS.COM
