14
PIX-25
4.
Press the
CHANGE
button to change the current
programming mode so the display shows
P-55
NUMBERING
.
5.
Press the
ENTER
button once and the clock will start
flashing the current repeat number setting (R1, R2 or
R3). The default = R1. When the repeat number is
set = 1, the number will in1 after each
number printed. When the repeat number is set = 2, the number will
in1 after twice the same number printed. When the repeat
number is set = 3, the number will in1 after triple the same
number printed.
6.
Press the
ENTER
button once to accept the current displayed value and
go back to the previous menu.
7.
Press the
PROGRAM
button to exit ALL programming.
Changing Begin Date for Daylight Saving Time (
P-56
)
Note
– The government standard for Daylight Saving is subject to
change. Your clock is factory set for correct Daylight Saving based upon
when it was manufactured, but any revision to Daylight Saving beginning
or ending dates may require updating the system-set Daylight Saving
calendar. The default start date setting = March 08, 2015 at 2:00AM,
which is the second Sunday of March, 2015.
If the current year and date has been changed, the available daylight
saving start/end date will be automatically updated as well.
The PIX-25 during DLS advance/rollback at 2:00 AM will only shift 1 hour.
If the DLS feature is enabled and the user sets the same start/end dates,
the clock will not change its time on the start/end date.
The following steps change the begin date for Daylight Saving. Updating the
beginning date for Daylight Saving needs to be done just one time, since the
clock’s rolling calendar function will auto-calculate the beginning date for
each year thereafter. To change the
end
date for Daylight Saving, refer to
the next section.
1.
With the cover removed, press and hold the
PROGRAM
button to begin
programming mode and
P1 TIME
will appear.
2.
Press the
CHANGE
button to change the current programming mode
until the display shows
P5 OTHER
.
: 866-487-4751
VISIT: WWW.TIMECLOCKEXPERTS.COM
