![background image](http://html.mh-extra.com/html/amano/cp-3000/cp-3000_user-manual_2918126063.webp)
CP-3000 User’s Guide
6-7
Display Related Problems
Low Battery
This display indicates that the battery is too weak to power-up the
system. If AC power is connected during this condition, the CP-3000 will
try to restart automatically once every ten minutes from the moment the
low battery condition was detected. If AC power is not present, the
indication will remain in the display and the unit will not recover
automatically.
During this low battery display indication, the time and date will be
maintained, and the number of prints made should be kept to a
minimum. If AC power is connected, there will be no loss of programmed
data.
If there is no damage to the battery, the battery can be recharged by the
AC power supply, and the time unit will restart by itself. Please allow the
CP-3000 24 hours to recharge the battery completely.
Power Failure
A blinking LED and constant colon in the display indicates an AC power
failure. When this occurs, the operation of the CP-3000 is taken over by
the internal battery.
If AC power is connected and working, and the display indicates a power
failure, contact your local Amano dealer.
Inaccurate Clock
The clock frequency is factory set. If you feel that your clock is
inaccurate, please contact your local Amano dealer.
LED’s Not Functioning
If the LED’s fail to function on the front panel, run the
LED
test in the
Diagnostics
menu. If the problem is not resolved, contact your local
Amano dealer.
Содержание CP-3000
