![background image](http://html.mh-extra.com/html/amano/cp-3000/cp-3000_user-manual_2918126020.webp)
2-10
CP-3000 User’s Guide
Note:
Initialization or pressing the
Reset
button does not mean that all
program data is reset to defaults. Only the time and date are
reset to defaults. The CP-3000 is reset to defaults by performing
a Reset (All Clear).
Reset (All Clear)
This function is provided to clear all programmed data (
Weekly
Programs
, imprint formatting, etc.) from the CP-3000. When used, all
programmed data will be erased (including the “As Shipped” formats)
and the unit will be returned to its default settings. You should only
reset your CP-3000 when prescribed to in the
Troubleshooting
section of this manual.
Note:
ESD (Electrostatic Discharge) precautions should be adhered to
before touching the
Mode Switch
.
To Reset (Clear All) your CP-3000, perform the following:
Step 1
. Set the Mode Switch to PROGRAM.
Step 2
. Insert a small screwdriver into the Reset Hole, on the bottom of
the unit, and press and hold the Reset button.
Step 3
. While holding the Reset button, press and hold the YES and
FUNCTION buttons.
Step 4
. Release the Reset button. Five beeps will sound
Step 5
. Release the YES and FUNCTION buttons and and set the
Mode Switch to NORMAL.
Power Connection
AC Power connections are made by plugging the power cord into a
suitable, grounded outlet.
Содержание CP-3000
