![background image](http://html.mh-extra.com/html/amano/cp-3000/cp-3000_user-manual_2918126040.webp)
4-10
CP-3000 User’s Guide
Automatic Adjustment
To program for DST, you must specify the day that the DST period will
begin or end, by date or week number. If a date is specified, the time
change will occur at 2:00 am on the begin and end dates. If a week is
specified, the time change will occur at 2:00 am on the Sunday of the
programmed week. You must set the
DST Begin Date
(increment by
one hour) and
End Date
(decrement by one hour) once each year. If no
DST Begin Date
is specified, the automatic DST adjustment will be
disabled.
Note:
To set the
DST Begin Date
and
End Date
you must cycle
through the sequence of displays of each item and save the
data entered. The data entered will not be saved if you exit the
Program Mode
or press the
FUNCTION
key before saving.
By Week Number
Step 1
.
If you have not already done so, enter
the
Program Mode
and press the
FUNCTION
key until the
Day Change
Time
menu item appears in the display.
Step 2
.
Press the
YES
key three times until the
DST Begin Date
menu item appears with
the first pair of digits (month) flashing in
the display. Verify that these digits are
“00” and press the
YES
key. The second
pair of digits (week number) will flash in
the display.
Step 3
.
Press the
NO
key until the correct week
number of the year (01 thru 52) appears
in the display. Holding down the
NO
key
formore than three seconds will increment
thenumber in the display by ten.
Содержание CP-3000
