![background image](http://html.mh-extra.com/html/amano/cp-3000/cp-3000_user-manual_2918126058.webp)
6-2
CP-3000 User’s Guide
Obtain a printout of programmed data in your CP-3000. Verify that
Signal 1
is correctly programmed in the
Weekly Program
Run the Signal 1 Test from the
Diagnostics
menu to check if the
Signal 1
relay is operating properly. If it is not, contact your local
Amano dealer
Foreign Object or Material
Only a time card should be inserted into the unit. If foreign objects or
materials get inside the CP-3000, you must disconnect the AC power
and the battery, and remove the foreign objects.
Programming
If you suspect a programming problem or the imprint position (margin)
is incorrect, it is recommended that you obtain a printout of the
programmed information as described in
Chapter 4
and troubleshoot
the programmed data, or perform a Reset (Clear All) to reset the unit to
defaults.
If you are unable to resolve the problem, please contact your local
Amano dealer.
Key Failure
If you suspect that one of the keys has failed, you should run the Key
Test in the Diagnostics menu.
Audible Beeps
The time recorder is equipped with an audible alarm that “beeps”. The
beeps will vary in duration and corresponding meaning (see the
following).
Содержание CP-3000
