manualshive.com logo in svg

Amano AXP-100, Руководство по эксплуатации

Поделиться
Скачать
Amano AXP-100 Скачать руководство пользователя страница 39

Amano AXP-100 Operations Manual 

5-13 

No Keypress Timeout 

The No Keypress Timeout means the time that the system allows for a key 
on the keypad of the DEU to be pressed after a valid tag has been presented 
to the DEU.  

If it takes longer than the allowed time for a key to be pressed, the system 
will reset and be ready for the presentation of the next tag. 

To set the No keypress timeout, click on the 

No keypress timeout

 block in 

the “Timeout” box. The figures in the block will be highlighted. Now, using the 
number keys on the keyboard of the PC, type in the required figures between 
0 and 255 (seconds). The new number will be displayed in the block. 

Key Entry Time 

The key entry time is the time that the system allows for a set of numbers 
e.g. a reason code or a PIN, to be entered into the keypad of the DEU once 
the first number has been typed or a tag presented and waits for PIN or 
reason. 

To set the no key entry time, click on the 

Key entry time

 block in the 

Timeout

 box. The figures in the block will be highlighted. Now, using the 

number keys on the keyboard of the PC, type in the required figures between 
3 and 60 seconds. The new number will be displayed in the block. 

Long Keypress Time 

To enter certain functions in the system, hold down the key allocated to that 
specific function e.g. # for programming mode. The long keypress time is the 
time set in the system for a key to be pressed before special functions can be 
entered. 

To set the long keypress time, use the mouse to click on the 

Long keypress 

time

 block in the 

Timeout

 box. The figures in the block will be highlighted. 

Now, using the number keys on the keyboard of the PC, type in the required 
figures between 20 and 100. (100=10 seconds). The new number will be 
displayed in the block. 

Power Failure Timeout 

If there is an AC power failure, the system will raise an alarm if the power is 
not switched on again within a certain period of time. This period of time is 
called the Power failure timeout. 

To set the Power failure timeout, use the mouse to click on the 

Power failure 

timeout 

block in the “Timeout” box. The figures in the block will be 

highlighted. Now, using the number keys on the keyboard of the PC, type in 
the required figures between 0 and 60 minutes (0 disables this feature). The 
new number will be displayed in the block. 

Содержание AXP-100

































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды