Amano AXP-100, Руководство по эксплуатации

Страница: 35 / 96

Amano AXP-100 Operations Manual 5-9
Reason Codes
This setting forces tagholders ( with Reason code enforced per tag ) to a
Reason Code to open the door.
Note: Door entry with respect to PIN’s and Reason Codes is given to
tagholders when their tag details are entered into the system.
1.
To enforce the Reason Code entry use the mouse to click on the
Enforce reason code entry button.
2.
To relax the Reason Code entry use the mouse to click on the Relax
reason code entry button.
Notes:
1.
If the terminal requires both PIN and Reason Codes, the PIN code must
be entered before the Reason Code:
2.
If the Reason Code is set to 2 digits, then two digits must be entered for
all Reason Codes, e.g. for Reason Code = 1, enter 01, and so on.
Suspend Tags
This setting enables the system to either allow or deny entry through the
door by certain levels of tagholder should the need arise.
When the Advanced Door Settings have been completed, click on the “Disk”
at the bottom of the Advanced Door Settings Dialog to save the settings.
Alarm Mode
The settings in the Alarm Mode box will only respond if “Alarm” has been
selected in the Door Mode as described above.
There are two functions to be set in the alarm mode namely Toggled or
Pulsed and the Alarm Drive Time.
To set the Toggled or Pulsed function the advice of the technician who will
carries out the installation is required, because these functions refer to the
state of Relay #2 that controls the alarm and intrusion siren circuits in AXP-
100 Door Control Unit.
Toggled
To select the Toggled mode use the mouse to click on the Toggled button in
the Alarm Mode box.
Pulsed Alarm Mode
To select the Pulsed mode use the mouse to click on the Pulsed button in
the Alarm Mode box.