Amano AXP-100, Руководство по эксплуатации

Страница: 37 / 96

Amano AXP-100 Operations Manual 5-11
Latch Settings
There are two functions to be set in the alarm mode namely Toggled or
Pulsed and the Latch Drive Time.
To set the Toggled or Pulsed function the advice of the technician who will
carries out the installation is required, because these functions refer to the
state of Relay #1 that controls the latch circuits in AXP-100 Door Control
Unit.
Toggled Latch Setting
To select the Toggled mode use the mouse to click on the Toggled button in
the Latch Settings box.
Pulsed Latch Setting
To select the Pulsed mode use the mouse to click on the Pulsed button in
the Latch Settings box.
Latch Drive Time
The latch drive time means the length of time the latch will drive for, when in
pulsed mode.
To set the latch drive time use the mouse to click onto the Latch drive time
block. The figure will be highlighted. Now, using the number keys on the
keyboard of the PC, type in the required figures between 0 and 9999 (1 = 0.1
seconds). A setting of 0 will cause the latch to drive as long as a valid tag is
being presented.
General
Two functions are set in the General box on the “Settings” screen. They are
Buzzer volume and LED mode
Buzzer Volume
The buzzer volume has four settings: They are: Off, Soft, Medium and Loud.
To set the buzzer volume click on the Buzzer Volume block in the “General”
box. A menu showing the four settings will be displayed. Click on the
required setting and the chosen setting will be transferred to the Buzzer
Volume block.
LED Mode
The LED is the Light Emitting Diode that is fitted to the door entry unit (DEU).
The LED mode enables the programmer to allow the LED on the DEU to
remain switched off until a tag is presented.