Amano AXP-100 Скачать руководство пользователя страница 29

Страница: 29 / 96

Amano AXP-100 Operations Manual

5-3

The “Saving System Parameters” screen will be displayed. Click “OK” to
close.

Notes:

The time periods for which access is allowed to User tagholders are
referred to as “Open” time periods, and the remainder are referred to as
“Restricted” time periods.

“Open” time periods are indicated by a green bar in the Time Patterns
screen, and “Restricted” time periods by red bars.

Date/Time Setting

The date/time settings are the real time clock settings that are used in the
system to control the entry of tagholders, and to generate reports.

To set the date and time click on the “

Date /Time”

tab on the System

Parameters menu. The

Date/Time Screen

as shown below will be displayed.

Date/Time Screen

Note: The date and time for the unit are controlled by the clock in the PC and
cannot be set independently for the system.

Содержание AXP-100
































































































Результаты поиска

Содержание AXP-100

Отзывы:

Бренды по названию

Популярные бренды

Amano AXP-100, Руководство по эксплуатации

Результаты поиска

Содержание AXP-100

Отзывы:

Бренды по названию

Популярные бренды