Programming the In-Band DTMF Protocol
Installation and Programming Manual
6-5
6.1.6 MATRA Support
The MiniSOHO can support Q23 Protocol . To activated the support in Q23 :
Enter to programming mode and dial :
*204 + X
where X=1 , MiniSOHO support X=0 , MiniSOHO not support
6.2 Sample Programming
6.2.1 Working with the SIEMENS Hicom 150E Office PBX
By default, the SIEMENS Hicom 150E Office PBX uses the following DTMF
characters for integration with the MiniSOHO:
***1 ** Source *1
Internal call to Voice Mail
***2 02222 *1
To activate the Automated Attendant (external call)
***3 ** Source Target *1
Call forward all (leave a message)
***4** Source Target *1
Call forward after no answer
***7** Source Target *1
Call forward after busy
Note: All source and target extension numbers in the SIEMENS Hicom 150E
OfficePBX system have three digits.
6.2.1.1 Programming Using a DTMF Telephone
¾
To program the MiniSOHO to detect an In-Band DTMF code
from the PBX and enable an internal caller to retrieve messages
from a mailbox (***1 ** Source *1):
1. Dial *200 00 ** ** ** 1 ** ** *2*2*2 ** 1 #
*200 is the programming code to define an In-Band DTMF code
00 is the event number assigned by you to the In-Band DTMF code
Each * in the above PBX DTMF code is replaced by **