DTMF
Programming
Installation and Programming Manual
3-33
where X is system message affected:
X = 1 system message 004
X = 2 system message 102
X = 3 system message 095
Y = 0 play the message (default)
Y = 1 do not play the message
Y = 2 (only when X = 3) plays message to mailboxes without a greeting message
3.8.8 Listening to the Software Version Number
To hear the MiniSOHO’s software version number, dial *900 and the administrator
password to enter the programming mode, then dial:
*680
3.8.9 Resetting the System
The System Administrator can reset the MiniSOHO to its factory default settings
by dialing *900 and the administrator password to enter the programming mode,
then dial:
*654 + * + XXXX + #
where XXXX is the System Administrator’s password.
Note: If you plan to reconfigure the MiniSOHO for use with your current PBX and
the MiniSOHO had previously been configured for use with a different PBX
type, use this command to clear all existing settings and return to the factory
default settings.
3.8.10 Adjusting Recording Length
The System Administrator can select the length of the recorded messages in the
MiniSOHO. The selected length of message (in minutes) will affect all recorded
messages. The types of recorded messages that are affected are: script recordings,
mailbox owner’s greetings, name recordings and recorded incoming calls.
