DTMF
Programming
Installation and Programming Manual
3-29
x
System message 104 (No-Answer and the extension does not have a mailbox)
is replaced by script message 24 in the first language, script message 34 in the
second language and script message 44 in the third language.
For instructions on programming the above script messages, see Section 3.7.2. For
instructions on recording the script messages, see Section 3.7.1.
3.7.5.4 Do Not Disturb
Using the user menu, a mailbox owner can activate the Do Not Disturb mode.
When a caller dials a Do Not Disturb extension, the MiniSOHO plays system
message 121 and does not transfer the call to the extension. The System
Administrator can replace this message with script message 25 in the first
language, script message 35 in the second language and script message 45 in the
third language.
3.8 Additional Features
3.8.1 Changing Passwords
The MiniSOHO uses three types of passwords:
x
System Administrator’s password
x
Operator’s password
x
Mailbox owner’s password (see Section 5.4.4)
A password always contains four digits (0-9). The default for all three types of
passwords is 1234.
3.8.1.1 Changing the System Administrator’s Password
The System Administrator can change his password by dialing code *900 to enter
the programming mode, dialing the current password and then dialing:
*600 + * + Old Pa New Pa #
System administrator password must be 4 digits.
Warning: Do not use * and # keys.
Note: The System Administrator’s password cannot be disabled.
