DTMF
Programming
Installation and Programming Manual
3-23
3.7.2.11 Leave a Message in a Mailbox
Initiates the procedure for leaving a message in a mailbox.
Command: *150 + XX + B + #
Example:
*150 00 8 #
The MiniSOHO asks for a mailbox number when “8” is dialed during
playback of script message 00. After dialing the requested mailbox
number, the caller hears the mailbox’s greeting and can leave a
message.
3.7.2.12 Retrieve Messages from a Mailbox
Initiates the procedure for retrieving messages from a mailbox.
Command: *160 + XX + B + #
Example:
*160 00 9 #
The MiniSOHO asks for a mailbox number and password when “9” is
dialed during playback of script message 00. After dialing the
requested mailbox number and password, the mailbox owner can
retrieve his messages and access the user menu to record a personal
greeting, change his password, etc.
3.7.2.13 Direct Call to an Extension
Enables the caller to dial an extension directly by programming the first digit of the
extension. When a caller dials the first digit of an extension during playback of a
script message, the MiniSOHO stops the message and waits for the rest of the
digits of the extension. The number of digits in an extension is defined by code
*300 in
Table 3-1. You can enter up to four different digits.
Command: *170 + XX + first digit(s) + #
Example 1: *170 00 2 #
The MiniSOHO waits for the rest of the extension number when “2” is
dialed during playback of script message 00. After the caller dials the
rest of the extension number, the MiniSOHO transfers the call to the
extension.
