Amana GCIA045A30, Инструкция по эксплуатации

Страница: 28 / 106

BLOWER PERFORMANCE SPECIFICATIONS
28
Rev. 2
1. Units are shipped without filter(s). CFM in chart is without filter(s).
2. All furnaces shipped as high speed for cooling. Installer should adjust blower speeds as needed.
3. INSTALLATION IS TO BE ADJUSTED TO OBTAIN TEMPERATURE RISE WITHIN THE RANGE SPECIFIED ON THE
RATING PLATE.
4. The chart is for information only. For satisfactory operation, external static pressure not to exceed value shown on
rating plate. The shaded area indicates ranges in excess of maximum external static pressure allowed when heating.
5. The above chart is for U.S. furnaces installed at 0-2000 feet. At higher altitudes, a properly derated unit will have
approximately the same temperature rise at a particular CFM, while the ESP at that CFM will be lower.
SINGLE STAGE
MODEL TONS AC
External Static Pressure, Inches Water Column
(Htg. Speed @ 0.5" 0.1 0.2 0.3 0.4 0.5 0.6
As Shipped) ESP CFM Rise CFM Rise CFM Rise CFM Rise CFM Rise CFM Rise
HIGH 3.0 1455 - 1430 - 1360 - 1255 - 1160 - 1040 -
GCI_045_30 MED-HI 2.5 1255 - 1200 - 1150 - 1075 - 990 - 890 38
(Low) MED-LO 2.0 1010 - 980 35 940 36 880 39 810 42 700 49
LOW 1.5 775 44 745 46 710 48 655 52 560 61 435 -
HIGH 3.0 1455 - 1420 - 1365 - 1275 - 1145 - 1015 50
GCI_070_30 MED-HI 3.0 1110 46 1090 47 1050 48 1015 50 935 54 845 60
(Med-Lo) MED-LO 2.5 910 56 905 56 895 57 860 59 810 63 745 68
LOW 2.0 730 69 715 71 710 71 680 75 645 - 490 -
HIGH 3.5 1655 - 1580 - 1500 - 1445 - 1366 - 1280 -
GCI_070_40
MED-HI 3.0 1530 - 1470 - 1400 - 1345 - 1280 - 1210 -
(Low) MED-LO 3.0 1090 47 1075 47 1055 48 1015 50 975 52 915 55
LOW 2.5 945 54 935 54 915 55 890 57 850 60 810 63
HIGH 3.5 1620 - 1550 - 1470 46 1385 49 1265 54 1165 59
GCI_090_30 MED-HI 3.0 1415 48 1355 50 1285 53 1215 56 1120 61 1015 67
(High) MED-LO 2.0 1025 67 1010 68 990 69 945 72 890 - 815 -
LOW 1.5 850 - 840 - 810 - 790 - 750 - 675 -
HIGH 5.0 2110 - 2030 - 1960 - 1870 - 1780 - 1680 -
GCI_090_50
MED-HI 4.0 1830 - 1765 - 1710 - 1640 - 1550 - 1470 46
(Med-Lo) MED-LO 3.5 1260 54 1255 54 1230 55 1200 57 1170 58 1115 61
LOW 3.0 1015 67 1000 68 980 70 964 71 930 73 875 -
HIGH 4.0 1960 - 1890 45 1825 46 1745 49 1660 51 1580 54
GCI_115_40
MED-HI 3.5 1725 49 1685 50 1640 52 1585 53 1515 56 1440 59
(High) MED-LO 3.0 1440 59 1425 60 1405 60 1380 61 1335 64 1275 67
LOW 2.5 1035 - 1025 - 1015 - 1005 - 975 - 955 -
HIGH 5.0 2100 - 2060 - 2000 - 1915 - 1840 46 1750 48
GCI_115_50 MED-HI 5.0 1915 - 1890 45 1840 46 1775 48 1710 50 1635 52
(Med-Hi) MED-LO 4.0 1535 55 1516 56 1485 57 1455 58 1410 60 1355 63
LOW 3.0 1175 72 115 73 1140 74 1120 - 1090 - 1060 -
HIGH 5.0 2255 45 2170 47 2065 49 1970 51 1845 55 1735 58
GCI_140_50
MED-HI 5.0 2170 47 2045 50 1945 52 1855 55 1750 58 1650 61
(High) MED-LO 4.0 1845 55 1790 57 1720 59 1620 63 1525 66 1445 70
LOW 3.5 1425 71 1390 73 1370 74 1320 - 1265 - 1185 -
CFM & Temperature Rise vs. External Static Pressue
MOTOR
SPEED