7
A
B
C
Remove Door Stops
1. Unscrew the Phillips screw and remove door stop
(A)
from bottom
edge of fresh food and freezer doors. Retain all screws for door stop
replacement.
A
Reverse Handles
1. Remove plugs
(A & B)
from top side of freezer door.
2. To remove handle
(C)
, remove 2 Phillips mounting screws
(D)
on top
edge of freezer door. Remove 2 Phillips screws
(E)
from handle on
underside of freezer door.
3. Install handle
(C)
on opposite side of door and secure with four
screws from previous step.
4. Insert plugs
(A)
and hole plug
(B)
into holes on top of door.
5. Remove plugs
(F & G)
, and 1 plug
(H)
from refrigerator door.
6. Using putty knife gently pry trim
(I)
away from fresh food handle until
it snaps free.
7. For Extended Trim ModelsGently pull trim out and away from door
in trim lock areas
(N)
until trim comes away from door.
8. Remove Phillips screw (K) from refrigerator handle
(M)
. Remove 2
Phillips screws
(L)
from top of handle
(M)
.
9. Install handle
(M)
to opposite side of door and secure with screws
from previous step.
10. For Extended Trim ModelsSlide both trim locks out of trim.
11. For Extended Trim ModelsInsert new adhesive trim locks into trim
(found in literature pack for some models).
12. Snap trim
(I)
on to fresh food handle. Carefully align trim and press
down at trim lock locations
(N)
(Extended trim models)
13. Insert plugs
(F, G & H)
into holes on top and front of door.
Reverse Hinges
1. Transfer two hex head screws from top corner of cabinet to holes left
from top hinge removal.
2. Transfer one Phillips screw opposite center hinge area to the hole
left by center hinge removal.
3. Transfer all hinges and shims to opposite side of cabinet.
Replace bottom hinge pin
(A)
in bottom hinge bracket
(B)
in
hole
(C)
toward outside of cabinet.
Install top hinge screws loosely to allow enough clearance to
reinstall door.
E
C
D
B
A
Installation
(contd)
Door Removal and Reversal Instructions
M
K
H
I
G
L
F
N
N
