Amada S-2200CA, Руководство по эксплуатации

Страница: 55 / 210

IS-2200CA/4500CA INVERTER POWER SUPPLY
990-412 3-1
CHAPTER 3
IS-2200CA/4500CA: USING PROGRAMMING
FUNCTIONS
Introduction
FLASH ROM The Power Supply writes data into FLASH ROM on the control board when a setting is
changed or a schedule data is copied. The READY lamp on the front panel and the external READY signal
are turned off during writing. Check that the READY lamp is turned on to start welding. It takes about 2
seconds at longest to change a setting and about 1 minute to copy a schedule into FLASH ROM. During
that time, do
not
turn the power OFF.
SHADED CHARACTERS
Items for which a value must be input, or which must be set ON or OFF
will be shaded . Move the cursor to the item and type in the appropriate changes.
WARNING
It is possible that weld current is flowing even though error message E-05
( NO CURRENT ) is displayed.
To avoid electrocution use extreme caution.
1. MENU Screen
The MA-660A has various functions that are set from the respective screens. The MENU screen
displays these functions in menu form.
Move the cursor () to the desired item; press the
ENTER key to move to the selected screen.
The numbers (1) to (18) indicate the paragraph No. within the chapter.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(16)
(17)
(18)
(8)
(9)
(10)
(11)
(12)
(13)
(14)