Amada S-2200CA, Руководство по эксплуатации

Страница: 203 / 210

APPENDIX E: COMMUNICATIONS
IS-2200CA/4500CA INVERTER POWER SUPPLY
990-412 E-15
Screen 05 (PRE-CHECK data) Specific data in accordance with Schedule No. (001 to 255)
Item Contents
Character
String
Range
1 PRECHECK TIME nnn, 000 to 100 (ms)
2 PRECHECK HEAT nn.n, 10.0 to 99.9 (%)
3 PRECHECK RESISTANCE HIGH nn.nn,
00.00 to 99.99 (mΩ)
4 PRECHECK RESISTANCE LOW nn.nn,
00.00 to 99.99 (mΩ)
5*
1
PRECHECK MONITOR nn.nn
00.00 to 99.99 (mΩ)
*1 Items inhibited from setting (When setting data, omit these items.)
Screen 06 (SYSTEM data) Common data (Schedule No.: 000)
Example of data writing:
#01W000S06:20,0,200,0,0,0,0,0,0,0,0,0,0,000000,0000,000000,0000,50,0.00,0.00,15,0,000,000,000,0,1,1,
1,1,1,0,0,0,1,2014,02,27,0,0,0,0,1,2,3,4,1.0[CR][LF]
Item Contents
Character
String
Range
1*
1
POWER SOURCE FREQUENCY nn, 50 or 60 (Hz)
2*
1
Model name nnnnnnnn, IS-2200CA or IS-4500CA
3*
1
ROM VERSION Vnn-nnn, V00-00A to
4 DELAY START SET nn, 01 to 20 (ms)
5 START SIGNAL MODE n,
0: LATCHED 1: PULSED
2: MAINTAINED
6 END SIGNAL TIME nnn, 000, 010 to 200 (ms)
7 END SIGNAL MODE n, 0, 1, 2
8 WELD1 STOP/PARITY CHECK n,
0:WELD1 STOP
1:PARITY CHECK
9 WELD2 STOP/WELD COUNT n,
0:WELD2 STOP
1:WELD COUNT
10 WELD3 STOP/COUNT RESET n,
0:WELD3 STOP
1:COUNT RESET
11 WELD TIME n, 0: ms 1: CYC
12 RE-WELD n, 0: OFF 1: ON
13 SCHEDULE n, 0:EXT 1:INT
14 STEPPER MODE n, 0:OFF 1:FIXED 2:LINER
15 COUNTER n, 0:TOTAL 1:GOOD 2:WORK
16 COMM CONTROL n, 0:OFF 1:--->2:<--->
17 COMM SPEED n, 0:9.6k 1:19.2k 2:38.4k
18 COMM MODE n, 0:RS-485 1:RS-232C
19 MONI DISP MODE n, 0:NORMAL 1:LAST
20 PRESET COUNT n, 0:TOTAL/GOOD 1:WELD/WORK
21
TOTAL/GOOD of PRESET
COUNT
nnnnnn, 000000 to 999999
22
WELD of WELD/WORK,
PRESET COUNT
nnnn, 0000 to 9999