AMA Instruments The GC 5000 BTX, Руководство по эксплуатации

Страница: 12 / 152

Operating Manual GC 5000 BTX; Version 5 – 11/2010 10
2.2 Responsibility of the operator
The analyzer described can only be used for applications which are
described in chapter 3.1. For operation of the system, the technical data
described in chapter 3.4 must be observed.
The analyzer described in this manual has been designed, manufactured,
inspected and documented in compliance with the relevant safety
standards. The design of the GC 5000 BTX ensures a safe operation. If the
operator follows the handling requirements and observes safety instructions
which are described for installation, operation and maintenance, then the
system will be not a source of danger to individual health and safety or to
property.
Warning!
In case you open the unit, certain parts which apply hazardous voltage
become accessible. Only qualified and accredited technicians in the field of
electricity are permitted to have access.
Only qualified and trained personnel with a thorough knowledge of all
sources of danger are permitted to have access to this system. Regarding
the safety information in this manual, qualified personnel is defined as
follows:
•
The operating personnel – They are trained in operating the system
and observing its safety requirements. As well they are familiar with the
operation-related content of this manual. This means they are able to
fully understand the English written safety instructions.
•
The commissioning or maintenance personnel – They are authorized to
install, operate, maintain and repair this kind of systems and electrical
circuits in accordance with accepted technical safety standards. They
possess the authorization and appropriate training to putting into
operation, maintain and repair this system. Furthermore they are able
to fully understand the English written safety instructions and
maintenance requirements as well.