AM TECH ATP-80KCL2, Руководство пользователя

Страница: 19 / 31

19
4.3 Error Checking Method
ERROR
CODE
ERROR
CONTENTS
CHECK POINT REPAIR
GOOD
CONDITION
Nothing Nothing
NEAR END
1 . Check to see if the PAPER ROLL is almost used up.
YES : go to REPAIR 1
NO : go to CHECK POINT 2
2 . Check to see if the PAPER ROLL is normally fitted
with.
YES : go to CHECK POINT 3
NO : go to REPAIR 2
3 . Check to see if the NEAR-END-HOUSING is
normally inserted in the connector (CN1).
YES : go to CHECK POINT 4
NO : go to REPAIR 3
4 . Check to see if the NEAR-END-CABLE is normally
applying an electric current.
YES : go to CHECK POINT 5
NO : go to REPAIR 4
5 . Check to see if the action condition of the
NEAR-END-SENSOR is normal.
YES : go to CHECK POINT 6
NO : go to REPAIR 5
6 . After replacing the NEAR-END-
SENSOR-CONTROLLER-ASSY with the new one,
check to see if it is working normally.
YES : END
NO : go to REPAIR 6
1 . Replace the PAPER
ROLL with the new
one.
2 . Fit the PAPER
ROLL in the
STACKER MODULE
normally.
3 . Insert the
NEAR-END
-HOUSING in the
connector (CN1).
4 . Replace the
NEAR-END- CABLE
with the new one.
5
. Replace the
NEAR-END-SENSOR-
CONTROLLER-ASSY
with the new one.
6 . Replace the MAIN-
CONTROL-CONTROL
LER with the new one.