AM TECH ATP-80KCL2, Руководство пользователя

Страница: 17 / 31

17
3.4 Installation
-Connecting Cable & Supplying Power & Initial Action
1. Connect data cable (SERIAL or USB) with cable port on controller
2. Connect power supplier connector with power connector on Control Board. You can hear beep sound.
z
When you supply power to printer without roll paper the RED LED on controller flashes.
3. After supplying power to printer once you open & close Thermal Head Part printer works initial action
cutting empty receipt.
# Initial action is preparation for keeping paper
3.5 How to Self Test
1) First check the DIP Switch No.1 is ‘ON’ and 2,3,4 are ‘OFF’
2) Push the ‘Feed Button’
3.6 How to set DIP Switch
SW No. Function ON OFF Factory setting
1
Presenter/Standard
mode select
Presenter
mode
Standard mode Off
2 Black Mark mode Enabled Disable Off
3
Font download
mode
Enabled Disable Off(*1)
4
Firmware
download mode
Enabled Disable Off
* 1 : Fixed to Off