AM General M915A1, Техническое руководство

Страница: 87 / 757

TM 9-2320-283-20-3
STEERING SYSTEM.
3-214. UPPER STEERING COLUMN REPLACEMENT AND REPAIR (Continued).
LOCATION/ITEM ACTION
REMARKS
A. REMOVAL.
1. Two screws (17)
and lockwashers
(18).
Remove from items (19) and
(5).
2. Cover (19). Remove from item (5) and
slide down on item (20).
NOTE
Do steps 3 and 4 only if replacing
brush assembly or cover.
3. Screw (22), lock- Remove from item (8).
washer (21), and
wire (20).
4. Cover (19) and
grommet (16).
Slide off item (20). Do this step only if
replacing item (19).
5. Two screws (7), Remove from item (5).
lockwashers (6),
and brush assembly
(8).
6. Nut (15), lock- Remove from item (13).
washer (14), and
screw (12).
7. Yoke (13) and
steering shaft
assembly (23).
a. Put an alinement mark on
each, if not already done.
b. Pull item (13) off of
item (23).
8. Six bolts (l),
lockwashers (2),
Remove from item (11) and
Hold items (3), (5), and
separate.
clamp (25), clamp
(10) before removing
(3), insulator (4),
last item (1). Leave
item (25) on two items
column assembly
(5), insulator (9),
(24).
and clamp (10).
3-1272