AM General M915A1, Техническое руководство

Страница: 49 / 757

TM 9-2320-283-20-3
WHEELS.
3-207. REAR HUB, BEARINGS, AND SEALS REPLACEMENT (Continued).
LOCATION/ITEM ACTION REMARKS
D. INSTALLATION (Continued).
18. Hub assembly
(6).
Fill cavity between item (3)
Refer to LO 9-2320-283-
and item (8) with lubricant. 12.
Position item (6) on item
(1). Center carefully. Do
not damage item (2).
19. Outer bearing cone Install on item (1) and into
assembly (9). item (8).
20. Brake drum and Install. Refer to paragraph 3-206
wheel. and TM 9-2320-283-10.
21. Nut (10). a. Install on item (1) with
machined shoulder surface
facing item (9).
b. Using torque wrench and
4-1/8 inch locknut wrench,
tighten item (10) to 50
lb-ft, while turning wheel
in forward and reverse
directions.
Back off item
(10) 1/4 to 1/3 turn.
Wheel should turn easily.
22. Lock (11). Put in item (1). Use new item (11) if
discarded in step (3).
23. Nut (12). Install with machined surface
facing out and tighten to
250-275 lb-ft.
24. Wheel. Rotate. Wheel should rotate
freely.
3-1234