AM General M915A1, Техническое руководство

Страница: 47 / 757

TM 9-2320-283-20-3
WHEELS.
3-207. REAR HUB, BEARINGS, AND SEALS REPLACEMENT (Continued).
LOCATION/ITEM
ACTION REMARKS
C. INSPECTION.
12. All parts. Inspect for cracking, Replace if damaged.
pitting, scoring, and wear.
Refer to TM 9-214 for
Inspect item (3) and item (9) inspection of bearings.
for missing rollers, flat,
chipped, or pitted surfaces,
discoloration, and secure
fit.
D. INSTALLATION.
NOTE
Use left-hand bolts in left hub and
right-hand bolts in right hub.
13. Ten bolts (5).
Install if removed.
Use press.
14. Eight studs (7). Install and tighten.
Use antiseize compound
on threads.
15. New cup (4) and
new cup (8).
Install into item (6) if
Press on or use brass
removed. drift and hammer. Make
sure item (4) and item
(8) are completely seat-
ed in item (6).
16. Inner bearing cone Install in item (4).
assembly (3).
17. New seal (2).
Install in item (6).
a. Put flange sealant on
large outside edge.
b. Use items (13) thru
(18), assembled as
shown.
c. Small end of item (2)
seats on item (14).
3-1232