AM General M915A1, Техническое руководство

Страница: 33 / 757

TM 9-2320-283-20-3
WHEELS.
3-205. FRONT HUB, BEARINGS, AND SEALS REPLACEMENT (Continued).
LOCATION/ITEM
ACTION REMARKS
A. REMOVAL (Continued).
NOTE
Only remove bolts (23) to replace them
with new ones.
9. Ten bolts (23). Remove from item (22). a. Use hammer or press.
b. Discard items (23).
B. CLEANING AND INSPECTION.
10. All parts. Clean and inspect. Refer to paragraph 3-4
and 3-5.
C. INSTALLATION.
NOTE
Put left-hand threaded bolts in left
hub and right-hand threaded bolts in
right hub.
11. Ten new bolts
(23).
Install in item (22). Use hammer or press.
12. New cup (4) and Install in item (22). Use hammer and brass
new cup (21). drift.
13. Cone (3).
14. New seal (2).
Install in item (4).
Install in item (22).
Dip in clean oil.
a. Put flange sealant on
large outside edge.
b. Use items (5) thru
(10) assembled as
shown.
c. Small end of item (2)
seats on item (6).
3-1218