AM General M915A1, Техническое руководство

Страница: 569 / 757

TM 9-2320-283-20-3
ACCESSORY ITEMS.
3-298. HEATER ASSEMBLY REPLACEMENT AND REPAIR (Continued).
LOCATION/ITEM
ACTION REMARKS
D. ASSEMBLY.
21. Deflector (15).
Push in item (16).
22. New strips (11).
Install on item (13).
23. Two new seals
Install on item (13).
(10).
24. Core (14). a. Slide into position by Be sure items (10) stays
pushing water tubes on in position in item
items (14) through holes
(13).
in items (10).
b. Secure with four items
(12).
25. Bottom shutter
a. Insert end of item (17)
and rod assembly in hole in item (13).
(17).
b. Slide over and push down
into notch in item (13).
Rotate item (13) in
position.
26. Top shutter and a. Insert end of item (18)
rod assembly in hole in item (13).
(18).
27. Grommet (19).
28. Heater blower
assembly.
b. Slide over and push down
into notch in item (13).
Rotate item (18) in
position.
Push into hole in item (13).
Install. Refer to paragraph
3-299.
E. INSTALLATION.
29. Two insulators
(25).
Install on four items (24).
3-1742