AM General M915A1, Техническое руководство

Страница: 405 / 757

TM 9-2320-283-20-3
CAB AND BODY.
3-269. HOOD REPLACEMENT (Continued).
LOCATION/ITEM ACTION
REMARKS
1. Four hooks (18). Remove from four items (8).
2. Two panels (2) and Raise and secure with safety
The safety chain hooks
(7).
chains (17). (17) should be placed in
the alining holes of
items (16).
Two assistants are recommended for the
remaining steps to prevent hood from
dropping after the two prop assemblies
have been removed from the hinge and
panel assemblies.
3. Two pins (11). Remove from items (15) on
right-hand and left-hand
side of vehicle.
4. Two pins (15) and Remove from upper halves on Items (16) will remain
four washers (10) two items (16). in the hood compartment.
and (14). The two assistants are
to remain on the fenders
and hold onto each side
of the hood panels.
5. Two hinge and panel
assemblies (5) and
Wrap items (5), (6), (2),
and (1) around twice
Make certain items (5),
and (7) are
(6), two panels (2) with each piece of rope going secured tightly against
and (7), and hinge through item (9) as shown. each other.
and support assem-
bly (1).
6. Eight screws (4)
Remove from eight holes of
and washers (3). item (1).
Two items (12) may drop
when items (4) are
removed.
3-1578