Alvarion BreezeMAX PRO 5000 CPE, Руководство по эксплуатации продукта

Страница: 78 / 116

Chapter 4 - Operation Registration Parameters
BreezeMAX PRO 5000 CPE 61 Product Manual
The new password is applied only after rebooting the unit.

Password Confirmation: re-enter the new password when defining one.

Organization: enter the name of the organization (customer) using the unit.
This parameter is optional, and is intended for optional use by the Network
Management System.
The Organization Name can include up to 32 printable characters.

Address: use this field to enter the location of the unit. This parameter is
optional, and is intended for optional use by the Network Management
System.
The Address can include up to 32 printable characters.

Country: use this field to enter the name of the country where the unit is
located. This parameter is optional, and is intended for optional use by the
Network Management System.
The Country name can include up to 12 printable characters.

Authentication: A security supplicant incorporated into the device supports
Single EAP-TTLSv0 with MSCHAPv2 method according to RFC2759. The
Authentication Mode allows enabling/disabling authentication using the
security supplicant. The available options are:
» Not Authenticated
» EAP-TTLS
When EAP-TTLS is configured the CPE will use the configured User
Name/Password with EAP-TTLS protocol for CPE Authentication by AAA. Over
the air data is encrypted using AES-CCM128 as defined in IEEE.802.16-2005.
When Not Authenticated, the CPE will not execute the EAP-TTLS protocol and
will be associated to the ASN GW in non authenticated mode. Over the air data
will not be encrypted.
If the SBC negotiation shows that the connected BS is working in Not
Authenticated mode, the CPE will change automatically to Not Authenticated