background image

Supervisor 4500 User Guide

Page 36                            For Assistance: [email protected]  +1 (909) 591-8431 

PUD4386R1-1

PIN 16 - DHO (Barrier Held Open)

Description

Barrier Held Open is both a setting and an output.

As a setting (accomplished through LaneConfig), the DHO timeout defines the time after which barriers 

will close if a number of card accept (ENTACC or EXTACC) or override (ENTOVR or EXTOVR) signals are 

received, but users do not pass through the lane. As an example, after a card accept or override signal, 

the barriers remain open until a user passes, or for the defined open period if a user does not pass. If a 

number of card accept or override signals are received in succession (and there is no user passage), the 

DHO setting limits the time the barriers remain open after the last card accept or override signal to the 

defined DHO time period (default is 12 seconds).
An output is generated when barriers remain open past the defined DHO time. One example of when this 

might occur would be if a sensor in the closing path of the barriers were blocked after opening. In this 

case, for safety reasons the barriers will remain open. In such a case the turnstile will generate a DHO 

output. This would be in addition to the local alarm that would sound at the turnstile.

Purpose and Customer Use 

The DHO output is an important output to monitor. It provides notification if barriers remain open beyond 

the expected “open” time. Security camera footage (if available) can be used to review the situation 

surrounding generation of this output if desired. 

PIN 17 - BREAKAWAY (Barrier Broken Away)

Description

An output contact is generated when the barrier holding force threshold has been exceeded and the 

barrier gives way. If the user proceeds through the turnstile, an unauthorized passage output will also be 

generated.   

Purpose and Customer Use 

This is an important output that is monitored by most customers. Security camera footage (if available) can 

be used to review the situation surrounding a breakaway alarm.

Outputs (cont.)

Содержание SU4500

























































Отзывы: