manualshive.com logo in svg

Aluvision Hi-LED 55, Руководство пользователя

Поделиться
Скачать
Aluvision Hi-LED 55 Скачать руководство пользователя страница 50

51

ALUVISION > Clemence Dosschestraat 44 > 9800 Deinze, Belgium > T: +32 (0)9 381 54 70 > [email protected] > www.aluvision.com

04

Hi-LED 55 configuration

04.1  Factory settings

When using the Hi-LED cabinets in different setups and projects, the cabinet settings get changed and 
can differ from each other after a while. When using those cabinets together again, it’s possible there’s 
a difference in colour or brightness between the cabinets. To match the colour and brightness settings  
again, you can perform a factory reset for one or more cabinets. 

The factory settings are stored in a 

configuration file (root file)

. Important to keep in mind is the batch  

number of your Hi-LED 55 cabinets, because 

the configuration file is batch dependent.

 Therefore 

performing a factory reset for multiple cabinets is only possible if those cabinets are from the same batch. 
Otherwise, wrong data will be sent to the cabinets causing errors. 

The configuration files (.rfcgx) for all batches can be downloaded from the 
Aluvision website: www.aluvision.com/en/products/downloads.

To perform a factory reset you’ll need the same setup as for configuring a screen. 

A Windows PC/laptop with NovaLCT software is required. The software doesn’t run on Macintosh. 

Connect your PC/laptop to the controller using an USB cable and power up the controller.

Open the NovaLCT software. This software is used to configure the cabinets. 

The software installation file can be downloaded from the Aluvision website: 
www.aluvision.com/en/products/downloads. Make sure to use software 
version 4.9.0, do not use the latest version from the Novastar website. 

Possible issue installing the NovaLCT software: the person installing the software (= the actual user  
logging in to the PC) needs to have (temporary) administrator rights during the installation process of the 
software. If not, he will not be able to access the program after installation.

Содержание Hi-LED 55




























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды