manualshive.com logo in svg

Aluvision Hi-LED 55, Руководство пользователя

Поделиться
Скачать
Aluvision Hi-LED 55 Скачать руководство пользователя страница 29

30

ALUVISION > Clemence Dosschestraat 44 > 9800 Deinze, Belgium > T: +32 (0)9 381 54 70 > [email protected] > www.aluvision.com

In the example below the signal/data flow starts with the bottom right cabinet and runs in a horizontal  
flow to the top right cabinet. The blue line and arrows represent the direction of the cabling.

 

Accordingly to this flow and the video’s pixelmap, assign the cabinets by clicking the correct position 
one by one, starting with the bottom right position (first cabinet in the flow). The green line that appears 
represents the signal/data flow.

All cabinets are now assigned to the correct position. Next, we have to tell the software that the gaps in 
between the cabinets have the same resolution as the cabinets. You can do this by setting the positions 
without video to blank. In other words, assigning an imaginary cabinet to the positions that are black 
in de video’s pixelmap. Click the top left position and select the box 

‘Set Blank’

. Proceed by clicking all  

empty positions.

Содержание Hi-LED 55




























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды