Altusen KN9000, Руководство пользователя

Страница: 39 / 76

A description of the Connection Screen is given in the following table:
Menu Bar The Menu Bar contains three items: File, Tools, and Help.
1. The File Menu allows the operator to Create, Save, and
Open user created Work files (see p. 40 for details).
2. The Tools Menu contains two entries: Keyboard and
Config, (see p. 32 for details).
KN9000 List: Each time KN9KClient.exe is run, it searches the User’s local
LAN segment for KN9000 units, and lists whichever ones it
finds in this box. If you want to connect to one of these units,
DClick it.
KN9000 IP: This area is used when you want to connect to a KN9000 at a
remote location. You can drop down the list box and select an
IP address or key in an IP address if the one you want isn’t
listed, then key in the Port number in the Port field. If you don’t
know the Port number contact the Administrator.
When the IP address and Port number for the KN9000 unit you
wish to connect to has been specified, Click Connect to start the
connection. When you have finished with your session, Click
Disconnect to break the connection.
Message List: Lists status messages regarding the connection to the
KN9000.
Switch to Remote View Once contact with a KN9000 has been established, this
button becomes active. Click it to switch and take over
console control of the unit that is attached to the KN9000.
The screen ouput of the unit appears on your monitor. Your
keystrokes and mouse movements are captured and sent to
the KN9000 to be executed on the attached unit.
If the KN9000 is connected to a KVM switch, you can control
the switch and the computers connnected to it just as if you
were connected locally.
Change Password This button becomes active after a connection to a KN9000
unit has been established. It allows the User to change the
password he logs onto the KN9000 with.
2004-05-04
29