Altusen KN9000, Руководство пользователя

Страница: 17 / 76

Installation
To install the KN9000, refer to the diagram below (the numbers correspond to the
numbered steps), and do the following:
1. Plug the local administrator’s keyboard, mouse, and monitor into the unit’s
Console Ports.
2. Use the KVM cable provided with this package to connect the Keyboard,
Video and Mouse ports from the KN9000’s KVM Port Section, to the
Keyboard, Video and Mouse ports of the server or KVM switch that you are
installing.
3. Plug the LAN or WAN cable into the KN9000’s RJ-45 socket.
4. Plug the power cord into the Power Socket and into an AC power source.
5. Power up your server or KVM installation.
6. Power up the KN9000.
1. Make sure that power to all the devices you will be connecting up
have been turned off. You must unplug the power cords of any
computers that have the Keyboard Power On function.
2. To prevent damage to your installation, make sure that all devices
on the installation are properly grounded.
KVM Switch
1
4
3
2
2004-05-04
7