Altusen ALTUSEN CC2000 Скачать руководство пользователя страница 50

Страница: 50 / 271

CC2000 User Manual

The Sidebar

Devices, ports and outlets that have been configured on the CC2000 are listed
in a tree structure in the Sidebar at the left of the screen:

Sidebar Characterisitcs

The characteristics of the Sidebar tree structure are the following:

Users are only allowed to see the devices, ports and outlets that they have
access permission for.

Ports/outlets and child devices can be nested under their parent devices.

Click the

in front of a device to expand the tree and see the ports/outlets

nested underneath it. Click the

to collapse the tree and hide the nested

ports/outlets.

Switches and ports that are online have their monitor screen icons in
Green; the monitor screens are Gray for devices and ports that are offline.

Clicking an item in the tree brings up its

Status and Operation

page.

Double clicking an active device or port opens the viewer for it.

Right clicking an active device or port opens a pop-up that allows you to
select a viewer to access it with (see

Port Operation

, page 38, for details).

cc2k.book Page 36 Tuesday, December 21, 2010 4:00 PM

Содержание ALTUSEN CC2000
















































































































































































































































































Результаты поиска

Содержание ALTUSEN CC2000

Отзывы:

Altusen ALTUSEN CC2000, Руководство пользователя, Страница: 50 / 271

Результаты поиска

Содержание ALTUSEN CC2000

Отзывы: