Altusen ALTUSEN CC2000 Скачать руководство пользователя страница 109

Страница: 109 / 271

Chapter 6. Device Management

To give users and groups access rights to the device, do the following:

1. Select the newly added Generic Device in the main panel or the Sidebar,

then select

Access Rights

on the Panel Menu bar. The User/Group List

page comes up.

2. Click

Add

(at the top-right of the panel). The

Qualified User/Group List

page appears, listing the users who can be given access rights to the
device:

3. Put a check in the box if front of the user or group name, then click the

arrow at the right of the Access column to drop down a list of access rights
choices.

4. Put a check in front of the rights you want the user or group to have, then

click

Save

(at the top-right of the panel). You return to the Device List

page. The Generic Device now appears in the list and in the Sidebar.

Note:

The items that appear in the access rights panel depend on the
settings choices that were made when the generic device was created
(see

Network Information

, page 94).

cc2k.book Page 95 Tuesday, December 21, 2010 4:00 PM

Содержание ALTUSEN CC2000
















































































































































































































































































Результаты поиска

Содержание ALTUSEN CC2000

Отзывы:

Altusen ALTUSEN CC2000, Руководство пользователя, Страница: 109 / 271

Результаты поиска

Содержание ALTUSEN CC2000

Отзывы: