manualshive.com logo in svg

Altusen ALTUSEN CC2000, Руководство пользователя, Страница: 242 / 271

Поделиться
Скачать
Altusen ALTUSEN CC2000 Скачать руководство пользователя страница 242

CC2000 User Manual

228

Offline Upgrade

An Offline upgrade can be performed either by the dealer/distributor, or the 
end user client. The advantage of this type of upgrade is that the client doesn’t 
give up the use of his key. All he needs to do is email a key information data 
file to the dealer/distributor and receive a key upgrade file in return. 

Preliminary Steps

To perform the upgrade, the first step that the client must perform is to create 
a 

Key Information Data File

, as follows:

1. With the authentication key plugged in, run the 

Key Status Utility

 

(CCAuthKeyStatus.exe).

2. In the 

License Upgrade

 panel of the dialog box that comes up, click 

Save

 

to create a 

Key Information Data File

 (KeyUpload.dat).

Note:

The Key Information Data File is created in the same directory that 
the Key Status Utility resides in.

After the Key Information Data File is created, the client sends it to the 
dealer/distributor.

cc2k.book  Page 228  Tuesday, December 21, 2010  4:00 PM

Содержание ALTUSEN CC2000
















































































































































































































































































Отзывы:

Нет отзывов